Model parameters¶
Note that the cross-section option (xseca) should not be enabled, because
it it does not affect the bound and resonant states, but can substantially
slow down the calculations.
Note
Once mcasopt has found a solution, you may wish to re-run MCAS with the cross-section option enabled.
Example parameters file¶
&fileinfo
runname = 'p+14O-vAmos'
options = 'vibration,sturm,res,phase'
&end
&system
projectile_mass = 1
projectile_charge = 1.0d0
target_mass = 14
target_charge = 8
&end
&integration
emin = 0.01
emax = 13.6
estep = 0.05
Rcoul = 2.59
acoul = 0.6
wcoul = -0.051
theta = 180
B = 1
rho = 7.d0
kpmax = 100
&end
&model
name = 'F15'
a = 0.63
bigR = 3.083
v0 = -43.16, 0.0 , -43.16
vll = 0.475, 0.0 , 0.475
vls = 7.0, 0.0 , 7.0
vss = 0.0, 0.0 , 0.0
ibmax = 12
nshells = 6
nsturm = 30
V_radius = 10.d0
ntargex = 5
targex(1)%energy = 0.0
targex(1)%spin = 0.0d0
targex(1)%parity = 1
targex(1)%alla = 0.0 , 1.0d+06, 1.0d+06, 9.42, 0.0, 0.0, 0.0
targex(1)%vib_amp = 1.0, 0.0, 0.0
targex(2)%energy = 5.92
targex(2)%spin = 0.0d0
targex(2)%parity = 1
targex(2)%alla = 0.0 , 1.0d+06, 1.0D+06, 4.2, 0.0, 0.0, 0.0
targex(2)%vib_amp = 0.0, 1.0, 0.0
targex(2)%width = 0.05d0
targex(3)%energy = 6.59
targex(3)%spin = 2.0d0
targex(3)%parity = 1
targex(3)%alla = 0.0 , 1.0d+06, 1000000.0, 2.9, 0.0, 0.0, 0.0
targex(3)%vib_amp = 1.0, 0.0, 0.0
targex(3)%width = 0.06d0
targex(4)%energy = 6.27
targex(4)%spin = 3.0d0
targex(4)%parity = -1
targex(4)%alla = 0.0 , 1.0d+06, 16.0, 11.75, 0.0, 0.0, 0.0
targex(4)%vib_amp = 1.0, 0.0, 0.0
targex(4)%width = 0.103d0
targex(5)%energy = 5.17
targex(5)%spin = 1.0d0
targex(5)%parity = -1
targex(5)%alla = 0.0 , 1.0d+06, 16.0, 5.25, 0.0, 0.0, 0.0
targex(5)%vib_amp = 1.0, 0.0, 0.0
nbeta = 2
beta(1)%nucl = -0.36
beta(1)%coul = -0.0
beta(1)%lval = 2
beta(2)%nucl = -0.48
beta(2)%coul = -0.0
beta(2)%lval = 3
&end